Cormach MEC 810VD-VDL-VDBL, Use And Maintenance Manual

Page: 6 / 78

Use and Maintenance Manual – 08/2018 Rel. 3 Page 1
CONTENTS
1. Introduction Page 2
2. Intended use Page 3
3. General safety rules Page 3
3.1 Safety devices Page 3
4. Transports and handling Page 3
5. Unpacking Page 4
6. Installation and commissioning Page 5
6.1 Installing display support Page 5
6.2 Installing external sensor (if present) Page 6
6.3 Installing wheel guard + wheel guard support Page 7
6.4 Installing SONAR device (if present) Page 8
6.5 Electrical connection Page 9
7. Installation Page 10
7.1 Installation area Page 10
7.2 Fixing the machine to the ground Page 10
8. Suspension of the use Page 10
9. Environmental information Page 11
10. Technical data Page 11
10.1 Machine dimensions Page 12
10.2 Working range Page 12
10.3 Presentation of the machine Page 14
11. Serial number plate information Page 14
12. Ordinary maintenance Page 14
13. Monitor Page 15
14. Keyboard Page 17
15. Operating modes STANDARD, SERVICE, STAND BY Page 18
16. Machine calibration Page 19
16.1 When to carry out machine calibration Page 19
16.2 Machine calibration for the CAR/SUV Wheel Type Page 19
16.3 Machine calibration for the MOTO wheel type Page 24
17. Use of the machine in normal mode Page 26
17.1 Program Type selection (Program Type) Page 27
17.2 Wheel Type selection (Wheel Type) Page 30
17.2.1 CAR wheel type (auto-vehicles) Page 32
17.2.2 MOTO wheel type (motorbikes) Page 32
17.2.3 SUV wheel type (Off-Roads vehicles) Page 34
17.3 Entering wheel dimensions Page 35
17.3.1 Automatic acquisition of the wheel dimensions for the STD and ALU1,2,3,4,5 Program Types Page 35
17.3.2 Automatic acquisition of the wheel dimensions for the ALS1, ALS2 program types Page 44
17.4 Use of the special program types for ALS1 aluminum wheels Page 46
17.4.1 Balancing spin Page 46
17.4.2 Search of the balancing planes Page 47
17.5 Use of the special program types for ALS1 and ALS2 aluminum wheels with laser (optional on MEC
810VD)
Page 48
18. Optimization Page 49
19. Hidden weights program Page 51
20. Second operator Page 56
21. Utility programs Page 57
21.1 Selection the imbalance display resolution Page 57
21.2 Selection of the static imbalance display Page 58
21.3 Electromagnetic clamping brake (only on MEC 820VD) Page 59
21.4 Illuminator (only on MEC 820VD) Page 60
21.5 SWI wheel stop procedure on the positions of imbalance (only on MEC 820VD) Page 61
21.6 Select grams/ounces Page 63
21.7 Select inches/millimeters Page 64
21.8 Select weight material in Fe/Zn or Pb Page 65
22. Error codes and solution Page 67
23. Warning codes Page 69
23.1 Acoustic signals Page 69
23.2 Special visual signals Page 69
24. Diagnostics and efficiency of accessories Page 70
25. Fire prevention means to use Page 70
26. Electrical diagram Page 71