Cormach MEC 810VD-VDL-VDBL, Use And Maintenance Manual

Page: 8 / 78

Use and Maintenance Manual – 08/2018 Rel. 3 Page 3
2. INTENDED USE
This manual is an integral part of product.
Read carefully warnings and instructions contained in this manual because they provide important information about SAFE USE and
MAINTENANCE.
KEEP WITH CARE THIS MANUAL NEAR THE MACHINE TO FACILITATE ANY CONSULTATION BY OPERATORS .
The wheel balancers have been made to be used in balancing of wheels cars (CAR), off-road vehicles (SUV), motorcycles (MOTO).
These wheel balancers are not designed for balancing wheels for transportation vehicles (light or heavy) and for special vehicles
(agricultural, forestry, mining, etc). The machines can work on wheels with diameter from 1" to 35" (or from 25 to 890 mm) and
width from 2" to 20" (or from 50 to 500 mm). All functions and controls are set through a series of buttons arranged on a panel. The
data are displayed on a led display.
3. GENERAL SAFETY RULES
The wheel balancer must be used exclusively for the purpose it was designed for.
Any other use is considered INCORRECT and UNREASONABLE. The use of wheel balancer is allowed only to authorized and trained
personnel. Do not put objects in the base which may affect the correct operation of wheel balancer.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY DAMAGE TO PERSONS OR PROPERTY CAUSED BY
UNAUTHORIZED PERSONNEL OR FROM IMPROPER, INCORRECT AND UNREASONABLE USE OF THE WHEEL
BALANCER.
THE WHEEL BALANCER SHOULD NOT BE MODIFIED OR TAMPERED WITHOUT PERMISSION OF
MANUFACTURER. ANY UNAUTHORIZED MODIFICATION MADE TO THE EQUIPMENT RELIEVES THE
MANUFACTURER FROM ANY LIABILITY IN CASE OF DAMAGE ATTRIBUTABLE TO SUCH ALTERATIONS.
3.1 Safety devices
The machine is equipped with the following safety devices:
- Wheel guard support.
- Wheel guard.
- Micro switch actuated by wheel guard support.
It is forbidden to tamper with, bypass or remove the safety devices installed because is a violation for the directives on safety and
health at work.
THE REMOVAL OR TAMPERING FOR THE SAFETY DEVICE IS A VIOLATION OF THE SECURITY EUROPEAN
DIRECTIVES.
4. TRANSPORT AND HANDLING
The wheel balancer is packed in a carton box on a pallet.
Transport and handling must be carried out ONLY BY AUTHORIZED PERSONNEL, with pallet truck
or forklift and adopting the appropriate safety measures.
Transport and handling must be carried out ONLY BY AUTHORIZED PERSONNEL, with pallet truck or forklift and adopting the
appropriate safety measures.
Net weight (Kg) Gross weight (kg) Lenght (mm) Width (mm) Height (mm)
MEC 810VD 130 138 520 520 1400
MEC 820VD 170 178 600 560 1400