Cormach MEC 810VD-VDL-VDBL, Use And Maintenance Manual

Page: 34 / 78

Use and Maintenance Manual – 08/2018 Rel. 3 Page 29
050
Based on the selected Program Type, will be displayed the
Program Type status icon and the position of the imbalance
weights.
Based on the active Program Type, the Program Type status and the position of the imbalance weights are displayed on the icon
band.
Note: the selection of the Program Type STD removes the visualization of Static Imbalance.
Acquisition through a sensor only uses the Distance/Diameter sensor.
The position of the balancing weights along the section of the rim in the various Program Types is shown in figure F17.1.
Figure F17.1: Position of the weights in the various Program Types along the section of the rim