Copystar Ri 2530, Service Manual

Page: 666 / 686

3DB
1-5-6
Contents
Remarks
Causes Corrective measures
Activity report, restricted access report, power
failure report or backup RAM error report is not
delivered to the administrator.
Received originals are not stored.
(including reception report)
The IP address or
host name
registered in the
scanner initial
setting is not
correct.
Accounting of an
administrator mail
address is not
performed in the
mail server.
The mail server is
down.
The administrator
mail software has
not started.
NW-FAX reception
setting is OFF.
The IP address or
host name of
storage destination
computer is not
correct.
The storage
destination
computer has not
started.
Transmission failed
because data
amount (traffic) on
the network was too
large.
Copying is being
performed.
Fax printing is being
performed.
Fax setting is being
performed.
Received originals
are being
transmitted.
Printing interrupt
occurs during
transmission.
Network scanner is
being used.
Check the registered IP address and host
name of mail server.
Contact the administrator for check.
Check the mail server.
Start the mail software.
Turn NW-FAX reception in the fax initial
setting ON.
Check the IP address and host name
registered in the fax and those in the storage
destination computer.
Start the storage destination computer and
start the Scanner File Utility.
Contact the network administrator for check.
Perform automatic retransmission after the
cause described left is cleared.