Copystar Ri 2530, Service Manual

Page: 611 / 686

3DB
1-3-4
(2) Contents of maintenance mode items
Maintenance
Description
item No.
U600 Initializing all data
Description
Initializes software switches and all data in the SRAM on the fax control PCB, according to the destination and
OEM.
Purpose
Used to initialize the fax control PCB.
Method
1. Press the start key. The screen for entering the destination code is displayed.
Enter a destination code using the numeric keys (refer to the destination code list on page 1-3-5 for the
destination code).
INI. ALL DATA
COUNTRY CODE:000
2. Press the start key. The screen for entering the OEM code is displayed.
There is no operation necessary on this screen.
INI. ALL DATA
OEM CODE:000
3. Press the start key. Data initialization starts. To cancel data initialization, press the stop/clear key.
4. After data initialization, the entered destination and OEM codes are displayed, and the ROM version is
displayed two seconds later.
INI. ALL DATA
COMPLETED 000 000
INI. ALL DATA
COMPLETED V1.00
Caution
If initialized with “000” (code for Japan) entered as the destination code, service call code C0820 (fax control
PCB problem) will be detected. Be sure to enter the correct destination code. If C0820 (fax control PCB
problem) is detected, press the COPY key to put the machine in the copy mode, open the front cover and then
execute this maintenance item again to enter the correct destination code and initialize data.