Copystar Ri 2530, Service Manual

Page: 541 / 686

Maintenance
Description
item No.
3CM
1-3-28
U651 Setting the system 2
Description
Sets the variation range in rotation reception and the number of adjustment lines for automatic reduction.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Press the appropriate item.
The screen for the selected item appears.
Sets the variation range in the auxiliary scanning direction
for rotation reception.
Sets the number of adjustment lines for automatic reduction.
Sets the number of adjustment lines for automatic reduction
when A4 paper is set.
Sets the number of adjustment lines for automatic reduction
when letter size paper is set.
Display
ROTAT. RX ERR
ADJ LINES
ADJ LINES (A4)
ADJ LINES (LT)
Description
Setting the variations range in rotation reception
Sets the maximum number of lines to be ignored when the received data exceeds the acceptable number of
lines in the rotation reception mode. If the number of excessive lines is smaller than the set value, those lines
are ignored and rotation reception is performed; if it is larger than the set value, rotation reception is not
performed.
1. Change the setting using the numeric keys.
Description
Number of variation lines in the auxiliary scanning direction
Setting range Initial setting
0 to 255 3
Even if rotation reception fails, it can be enabled by increasing this value, however, some parts of the
received image may not be printed.
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the number of adjustment lines for automatic reduction
Sets the number of adjustment lines for automatic reduction.
1. Change the setting using the numeric keys.
Description
Number of adjustment lines for automatic reduction
Setting range Initial setting
0 to 22 7
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the number of adjustment lines for automatic reduction when A4 paper is set
Sets the number of adjustment lines for automatic reduction when A4 paper is set.
1. Change the setting using the numeric keys.
Description
Number of adjustment lines for automatic reduction
when A4 paper is set
Setting range Initial setting
0 to 22 22
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the number of adjustment lines for automatic reduction when letter size paper is set
Sets the number of adjustment lines for automatic reduction when letter size paper is set.
1. Change the setting using the numeric keys.
Description
Number of adjustment lines for automatic reduction
when letter size paper is set
Setting range Initial setting
0 to 26 26
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.