Copystar Ri 2530, Service Manual

Page: 306 / 686

2DF
2-4-1
Timing c
har
t No.
1
F
rom the main s
witch turned on to mac
hine stabilization
MSW: On
MSW FH-M FH-S DM DB REM
CN31-1 CN1-5 CN1-6 CN11-9,11 CN7-1
CFM (second speed) CFM (first speed) PM TC REM
CN8-12 CN7-10
500 ms
500 ms
10 s
*3
100 ms
+400 V
+3000 V
+400 V
13 s
3 s
900 ms
2 s
1000 ms
*1: Copying is enabled as follows: 1. When fixing temperature at the main switch turning on is 100
°
C/212
°
F or lower
Absolute humidity is 15 g/m
3
or higher:
Copying is enabled 120 s after fixing heater M (FH-M) turning on. 2. When fixing temperature at the main switch turning on is 100
°
C/212
°
F or lower
The fixing temperature at the main switch turning on is 13
°
C/55.4
°
F or higher and the ambient temperature is 18
°
C/64.4
°
F or higher:
Copying is enabled at the earlier timing of either 41 s after fixing heater M (FH-M) turning on or when the copier enters sec
ondary stabilization.
Other than the above: Copying is enabled at the later timing of either 69 s after fixing heater M (FH-M) turning on or when the copier enters secon
dary stabilization.
3. Other conditions than 1 and 2 Copying is enabled when the copier enters secondary stabilization. *2: Rotates for 180 s at full speed when the fixing temperature at the main switch turning on is 100
°
C/212
°
F or lower, and the absolute humidity is 15 g/m
3
or higher.
*3: 60 s when the fixing temperature at main switch turning on is 100
°
C/212
°
F or lower, and the absolute humidity is 15 g/m
3
or higher.
Primary stabilization
fixing temperature
110
°
C/230
°
F
Secondary stabilization
fixing temperature
165
°
C/329
°
F
Copying enabled
*1
Half speed
Half speed
Full speed
Full speed
*2
30 s
15 s
700 ms