Multi Music System
10496
Instructions for Use
Please read and retain these instructions for future reference
v001: 28/09/16
Page No 18
sections within a track. As a result, this will very likely make the unit consider this silent part as the break
between tracks and create a new track on the recording.
During USB/SD recording from turntable, when the unit has detected any silent part, the turntable player will
stop momentarily. The turntable player will resume operation once the USB/SD device has begun creating a
new file to be recorded.
BLUETOOTH CONNECTION (Fig. 1)
1.
Press and hold the FUNCTION button till LCD shows “BT”, then the unit is ready for connection with your
Bluetooth device (such as mobile phone).
2.
Switch on the Bluetooth function of your Bluetooth device, and select “
10496
” Bluetooth equipment for
connection.
3.
After your Bluetooth device is connected to the unit via Bluetooth, start to playback your device.
EARPHONE JACK & LINE OUT SOCKET (Fig. 1)
-
This system can be connected to a headphone with a 3.5mm earphone jack.
-
This system can be connected with an external device (e.g. Amplifier and speaker) by line-out socket at rear
cabinet.
POWER SAVING FEATURE:
To save energy, if there is no audio signal from CD / Cassette / Turntable / AUX IN / USB / SD for a period of
over 10 minutes, the unit will automatically switch to Standby Mode.
REMOTE CONTROL:
BATTERY INSTALLATION
If there is a protection tab in the battery compartment, please remove it to put the battery in service.
TO CHANGE BATTERY:
1.
Open the battery cover.
2.
Insert a battery, 1 pc CR2025, make sure to match "+" and "-" of the battery to the marks inside the
battery compartment.
3.
Point the remote control at the remote sensor; operate in the range of 5 meters and 60° from the front of
the remote sensor. Make sure there is no obstruction between them.
4.
Replace only with the same or equivalent battery.
5.
If the remote control is not used for a long time, remove the batteries to prevent battery leakage.
6.
Do not drop the remote control. Keep in a dry environment.
7.
Please use a new battery to replace old one if the remote control does not work.