Multi Music System
10496
Instructions for Use
Please read and retain these instructions for future reference
v001: 28/09/16
Page No 12
AUX IN ENCODING (Fig. 1)
1.
Press the FUNCTION button to select “AUX” on display, then insert memory device (USB drive, SD or MMC
card)
2.
Press the “REC” button, it will take 3-5 seconds to read memory device. Then USB icon will be flashing.
3.
Press the SKIP UP
or SKIP DOWN
button to select desired mode (USB or SD) for encoding. Then
press the “REC” button again to confirm - the system starts the encoding mode after few seconds.
4.
If only USB drive or SD/MMC card is inserted, step 3 can be skipped.
5.
The USB or SD icon will flash on the display during encoding.
6.
To finish encoding, press the STOP
button and display will show “END” and return to “AUX” mode.
REMARKS:
-
The recording speed is 1:1 and according to the actual playing time of the external audio device.
-
The recording format is preset at – MP3 bit rate : 128 kbps
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD (Fig. 1)
CONNECTING
The system is able to decode and playback all MP3 / WMA files which are stored in the memory media via the
USB connecting port or SD/MMC memory card.
1.
Plug in the USB plug with the face up and make sure it pushes in fully or insert the memory card in the
direction of the arrow as shown on the label on the underside of the memory card slot cover. Insert
straight without bending.
2.
Warning: connecting the USB upside down or backwards could damage the audio system or the storage
media (USB thumb drive / SD/MMC card). Check the direction is correct before connecting.
3.
Press the FUNCTION button to select “USB” or “CARD” on display, then insert the memory device (USB
drive, SD or MMC card).
4.
The system will start reading the storage media automatically after function selection, and the display will
show the total number of MP3/WMA files (e.g. 016).
5.
Then the system will start audio playback from desired device (USB or SD/MMC) automatically.