Multi Music System
10496
Instructions for Use
Please read and retain these instructions for future reference
v001: 28/09/16
Page No 11
5.
Slightly press the “TAPE FAST FORWARD / EJECT BUTTON” again to resume normal playing, the button
will return to the raised position.
6.
Press the “TAPE FAST FORWARD / EJECT” BUTTON” completely, the playing will be stopped and the
cassette tape will be ejected.
REMARK
: When inserting the tape make sure it is inserted as shown in the
diagram. To avoid damaging the tape, it is highly recommended to remove the
tape after listening
.
CASSETTE TAPE ENCODING (Fig. 1)
1.
Press the FUNCTION button to select “TAPE” on display and then insert
memory device (USB drive, SD or MMC card)
2.
Press the “REC” button, it will take 3-5 seconds to read memory device. Then USB icon will be flashing.
3.
Press the SKIP UP
button or SKIP DOWN
button to select desired mode (USB or SD) for
encoding. Then press the “REC” button again to confirm, the system starts the encoding mode after few
seconds.
4.
If only USB drive or SD/MMC card is inserted, step 3 can be skipped.
5.
The USB or SD icon will flash on the display during encoding.
6.
To finish encoding, press the STOP
button and the display will show “END” and return to cassette
mode.
REMARKS:
-
The recording speed is 1:1 and according to the actual playing time of the cassette tape.
-
The recording format is preset at – MP3 bit rate : 128 kbps.
AUX IN JACK & ENCODING (Fig. 1)
Press the FUNCTION button to select “AUX” on display, then connect the external audio device (such as CD
player) through the “AUX IN JACK”. The audio signal from the external audio device can be played through the
system.
