Multi Music System
10496
Instructions for Use
Please read and retain these instructions for future reference
v001: 28/09/16
Page No 9
FM & FM-STEREO RECEPTION (Fig. 1)
Press the “FM ST.” Button on the remote control to select FM mono or FM stereo mode. When stereo
signal is weak it is preferable to listen to the program in mono.
“ST” icon lights up on the display to show FM stereo mode is receiving.
HINTS FOR BETTER RECEPTION (Fig. 3)
1.
AM: There is a built-in AM antenna. If AM reception is weak, slightly rotating or re-positioning of the unit
will usually improve the AM reception.
2.
FM: The receiver has a built-in FM wire antenna hanging at the rear cabinet. This wire should be totally
unravelled and extended for best reception.
AM & FM-STEREO RADIO ENCODING (Fig. 1)
1.
Press the FUNCTION button to select “TUNE” mode and select the desired band by pressing the BAND
button (AM or FM).
2.
Insert memory device (USB drive, SD or MMC card)
3.
Press the “REC” button, it will take 3-5 seconds to read memory device. Then USB icon will be flashing.
4.
Press the SKIP UP
button or SKIP DOWN
button to select desired mode (USB or SD) for encoding.
Then press the “REC” button again to confirm. The system is starting the encoding mode after a few
seconds.
5.
If only USB drive, SD or MMC card is inserted, step 4 can be skipped.
6.
The USB or SD icon will be flashing on the display during encoding.
7.
To finish encoding, press the STOP
button and display will show “END” and return to “TUNER” mode.
REMARKS:
-
The recording speed is 1:1 and according to the actual playing time of FM or FM-ST radio
-
The recording format is preset at – MP3 bit rate : 128 kbps
-
During FM & FM-STEREO radio encoding, radio frequency is fixed and cannot be tuned
RECORD PLAYER (Fig. 2)
-
Remove the stylus protector.
-
Make sure the tone arm is detached from the tone arm rest before operating and re-secured again
afterwards.
1.
Press the FUNCTION button to select “PHON” on display.
2.
Set the SPEED SELECTOR (26) to the proper position depending on the record to be played.
