Multi Music System
10496
Instructions for Use
Please read and retain these instructions for future reference
v001: 28/09/16
Page No 13
PLAY / PAUSE BUTTON
-
Press the “PLAY/PAUSE”
button once to stop playing, press it again to continue.
STOP BUTTON
-
Press the STOP
button to stop audio playback, the display will show the total number of MP3/WMA
files. Press “SKIP UP”
or “SKIP DOWN”
button to select file forward or backward.
SKIP UP
/ SKIP DOWN
BUTTON
-
During MP3/WMA playback, press the “SKIP UP”
button once to play the next file. Press and hold
the “SKIP UP”
button continuously to fast forward.
-
During MP3/WMA playback, press the “SKIP DOWN”
button once to play the previous file. Press
and hold the “SKIP DOWN”
button continuously to speed up selecting previous files.
FOLDER SEARCHING
Press the ALBUM DOWN or ALBUM UP button to search folder backward or forward.
REPEAT FUNCTION
During audio playback, press the “MODE” (5) button once, a single track will be played repeatedly. Press
the MODE (5) button again, it will repeatedly play all tracks in the whole USB drive, SD or MMC card.
REMARKS:
-
If connecting the system to MP3 player via the USB socket, due to variances in MP3 encoding format,
some MP3 players may not be able to play via the USB socket. This is not a malfunction of the system.
-
USB and SD device producers come in different formats therefore, not all USB and SD devices from every
brand are supported.
-
SD card can be supported up to 8GB
TRACKS PROGRAMMING (Fig. 1)
Tracks in USB/SD can be programmed for MP3/WMA file and played in any order. Be sure the system is in stop
mode before programming:
1.
Set at “USB” or “CARD” function, then press the STOP button.
2.
Press the MODE (5) button, “MEM” will be flashing on LCD display. Display will also indicate program no.
and digits for track no. to be programmed.
3.
Select a desired track by pressing the “SKIP UP”
or “SKIP DOWN”
button. If folder selection is
required, press the ALBUM DOWN or ALBUM UP button to search the folders backward or forward.
4.
Press the MODE (5) button to confirm and store the track into memory.
5.
Repeat steps 3 and 4 to enter additional tracks into the memory as required.