Cooper Notification SP40S Series, Installation, Testing, Operation And Maintenance Manual

Page: 31 / 81

Overview
SP40S Multi-Function Communications System 31
SW3 ( Strobe Activation)
PIN FUNCTION ON
1 DV1 Strobe STB on when DV1 active
2 DV2 Strobe STB on when DV2 active
3 DV3 Strobe STB on when DV3 active
4 DV4 Strobe STB on when DV4 active
5 DV5 Strobe STB on when DV5 active
6 DV6 Strobe STB on when DV6 active
7 DV7 Strobe STB on when DV7 active
8 DV8 Strobe STB on when DV8 active
9 MIC Strobe STB on when MIC active
10 AUX Strobe STB on when AUX active
SW4 (Tone Types)
PIN FUNCTION ON
1 Tone Type - DV1 Code 3 (OFF = continuous)
2 Tone Type - DV2 Code 3 (OFF = continuous)
3 Tone Type - DV3 Code 3 (OFF = continuous)
4 Tone Type - DV4 Code 3 (OFF = continuous)
5 Tone Type - DV5 Code 3 (OFF = continuous)
6 Tone Type - DV6 Code 3 (OFF = continuous)
7 Tone Type - DV7 Code 3 (OFF = continuous)
8 Tone Type - DV8 Code 3 (OFF = continuous)
9 Backup tone Code3 (OFF = slow whoop)
10 unused --
SW5 (Pre-tone/Post-tone Enable)
PIN FUNCTION ON
1 Pre-tone - DV1 Pre-tone ON for Message 1
2 Pre-tone - DV2 Pre-tone ON for Message 2
3 Pre-tone - DV3 Pre-tone ON for Message 3
4 Pre-tone - DV4 Pre-tone ON for Message 4
5 Pre-tone - DV5 Pre-tone ON for Message 5
6 Pre-tone - DV6 Pre-tone ON for Message 6
7 Pre-tone - DV7 Pre-tone ON for Message 7
8 Pre-tone - DV8 Pre-tone ON for Message 8
9 Post-tone - All Post-tones enabled (Post-tone Matches Pre-tone)
10 Message Repeat ON = Message plays a minimum of 3 times
OFF = Message plays a minimum of 1 time*
*NOTICE TO USERS, INSTALLERS, AUTHORITIES HAVING JURISDICTIONS AND OTHER
INVOLVED PARTIES: In order for this product to comply with the requirements in the Standard for
Control Units and Accessories for Fire Alarm Systems, UL 864, Position 10 of SW5 must be kept in the ON
position. UL 864, 9
th
Edition, section 34.2.1.1 requires the alert tone/prerecorded message combination shall
be repeated a minimum of 3 times.