Safety Precautions
SP40S Multi-Function Communications System
16
be purchased separately. If both sources of power are cut off for any reason, the SP40S
Multi-Function Facility Communication System
will not operate
.
1.
DO NOT assume any installation, operation, and testing details not shown in this
manual.
CAUTION: DO NOT operate the SP40S Multi-Function Facility Communication System
without the dead front panel being properly in place.
2.2.1 Expected Equipment Lifecycle
Notification equipment cannot last forever. Even though the SP40S Multi-Function Facility
Communication System is expected to last up to ten years, any of its parts or components
could fail before then.
2.2.2 Periodic Testing
1.
Cooper Notification recommends testing of the entire protective signaling system,
including the SP40S Multi-Function Facility Communication System, all notification
equipment, as well as all messages and their output channel, and priority assignment,
at least twice each year, or more often as required by local, state and federal codes,
regulations and laws, by qualified personnel.
2.
If the notification equipment is not working properly, immediately contact the
installer and have all/any problems corrected immediately.
3.
Replace any malfunctioning components immediately; do not attempt to repair
malfunctioning components. Return malfunctioning components for factory
repair or replacement. In the event you cannot contact the installer, contact the
manufacturer.
WARNING: FOR PROPER OPERATION IN LIFE SAFETY APPLICATIONS,
PERFORM THE FOLLOWING: (A) CONNECT THE SP40S MULTI-FUNCTION
FACILITY COMMUNICATION SYSTEM TO A LISTED COMPATIBLE AND
PROPERLY OPERATING CONTROL PANEL, WHICH CONTROLS ITS
ACTIVATION. (B) ENSURE THAT ALL EQUIPMENT IS PROPERLY
INTERCONNECTED AND OPERATING. (C) MAKE SURE THE INSTALLER
CHECKS THE COMPATIBILITY OF ALL EQUIPMENT PRIOR TO
INSTALLATION; OTHERWISE, THE SP40S MULTI-FUNCTION FACILITY
COMMUNICATION SYSTEM AND/OR THE CONTROL PANEL MAY BE
DAMAGED AND/OR FAIL TO OPERATE IN AN EMERGENCY SITUATION.
WARNING: CERTAIN HARDWARE FUNCTIONS ON THE SP40S MULTI-
FUNCTION FACILITY COMMUNICATION SYSTEM ARE NOT SUPERVISED. IF
ANY SUCH HARDWARE FUNCTIONS FAIL, THE SP40S MULTI-FUNCTION
FACILITY COMMUNICATION SYSTEM MAY NOT PROVIDE THE INTENDED
WARNING AND/OR NOT INDICATE A TROUBLE CONDITION.
Summary of Contents for SP40S Series
