5. Attach the hose to the window slider panel by
inserting the end of the hose into the opening
on the slider.(see Fig.6)
Fig.6
Type 2: Sliding window Installation (Optional)
1. Cut the adhesive foam seal A and B strips to
the proper lengths, and attach them to the
window sash and frame as shown.(see Fig.7)
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
Fig.7
2. Assembling the Sliding Window Adapter (Only
needed for Sliding Window applications):
Align both halves of the sliding window adapter
and connect them. Then, attach the air divider
to the newly formed window adapter on the
outdoor side. The fully assembled adapter
should look like the image at the left.(see Fig.8)
Sliding Window Adapter
(Front + Rear)
1 screw
Air Divider
Fig.8
Page 15
Installation
Instructions
Summary of Contents for CH-STLS-14AC
Page 27: ......
