Cooper & Hunter CH-STLS-14AC, Owner'S Manual & Installation Manual

Page: 15 / 30

Installation
Instructions

Page 13

3. Applying insulation to the window slider(For some units)
After assembling the window slider to your proper dimension, cut and apply the foam insu-
lation sheets to the exterior side of the window slider.
Window Slider Foam
Window
Slider Foam
NOTICE
Once the Exhaust Hose assembly and Adjustable Window Slider are prepared, choose from one of
the following two installation methods.
a
c
e
b
d
Three Window Sliders
with side holes
Two Window Sliders
without side hole
TYPE ONE
Use the table below to determine what
combinationof Window Sliders is correct
for your window
window slider window dimension
(mm)
window dimension
(inch)
a+b 484 592 19.1 23.3
b+c 592 696 23.3 27.4
a+b+c 696 802 27.4 31.6
b+e 802 896 31.6 35.3
a+b+e 896 998 35.3 39.3
a+b+c+d 998 1210 39.3 47.6
1210 1620 47.6 63.8
a+b+c+d+e
~
~
~
~
~
~
~
~
~
~
~
~
~
~
Table 1(For some units)
a b c d e
bolt bolt bolt
Bolt
TYPE TWO
Three Window Sliders
with side holes
Two Window Sliders
without side hole
b a
Use the table below to determine what
combination of Window Sliders is correct
for your window
Table 2(For some units)
window slider window dimension
(mm)
window dimension
(inch)
a+b 675 1245 26.8 49.0 ~ ~
a b