Page 12
Tools Needed
-Philips screwdriver;
-Tape measure or ruler;
Installation
Instructions
Window Installation Kit
Accessories
NOTE: Your window Installation Kit fits windows 19.1’’-63.8’’(48.4-162cm). Please doublecheck all packaging
materials to make sure accessories do not get accidentally thrown away. Items with (*) are on some models.
Slight variations in design may occur.
-Knife or scissors;
-Saw (optional, to shorten window adaptor for narrow windows)
Air Exhaust Adapter
Exhaust Hose
1. For Hung Window types only
Insert the Air Exhaust Adapter into the exhaust of the hose
(the circular opening) for optimal performance. Rotate the
adapter clockwise until the locking tabs click and it no longer
rotates.
Skip this step if installing into a horizontal sliding window.
The Air Exhaust adapter may interfere with some window
screens, and can be removed if desired (Please note this
may slightly decrease performance).
Hung Window
Sliding Window
Windows Type
Window slider
Window
slider
2. Preparing the adjustable window slider
1)
Depending on the size of your window, adjust the size of
the window slider.Use the combination of panels that best
fits your window opening.
2)
If the length of the window requires two or more window
sliders, use the bolt to fasten the window sliders once they
are adjusted to the proper length.
3)
If installing in a sliding window, bolts should be installed
on both sides of the window sliders.
Name of Accessories
Qty.
Shape
Name of Accessories
Qty.
Shape
1 pc(*)
1 pc(*)
1 pc
4 or 2pc
1 pc(*)
2-5 pc(*)
1 pc(*)
Foam Seal A (Adhesive)
Bolt
1 set
Security Bracket and 2 Screws
1 pc
Drain Hose
1 pc(*)
Power Cord Buckle
(only for cooling model)
O
N
/O
FF
TE
M
P
SH
OR
T
C
UT
TI
M
ER
O
N
TI
M
ER
O
FF
M
OD
E
FA
N
SL
EE
P
SW
IN
G
LE
D
1 set
Remote Controller and Battery
(only for remote control models)
1 - 8 pc
1 pc(*)
Drain Hose Adaptor
(only for heat pump model)
Air exhaust adapter
Window Sliders(model dependent)
Window Kit Brace
Sliding Window Adapter–Front
Sliding Window Adapter–Rear
Sliding Window Adapter–Air Divider
Foam Seal B (Adhesive)
Foam Seal C (Non-adhesive)
Window Slider Foam (adhesive)
2 pc(*)
Heat pump hose insulation foam
(optional)
1 set(*)
1 pc(*)
1 Screw ( on Exhaust adaptor)
2 pc
2 or 1pc
Summary of Contents for CH-STLS-14AC
Page 27: ......
