33
SYSTEM PROGRAMMING AND SETTING
The list of alarm functions (f = 1-12) for system universal inputs:
1
– door terminal switch
2
– driver’s door terminal switch
3
– hood terminal switch
4
– trunk terminal switch
5
– hood/trunk terminal switch
6
– universal terminal switch
7
– siren of additional security system
8
– external sensor
9
– shock sensor
10
– motion sensor
11
– inclination sensor
12
– glass brake sensor
Depending on parameter value f (1-12) alarm notification text changes (SMS or voice) and also call group number
to which this input will correspond will be changed. Input functions on default:
IN1 f=1 IN5 f=5
IN2 f=2 IN6 f=0
IN3 f=3 IN7 f=7
IN4 f=0 N8 f=8
Type and polarity of inputs on default:
IN1 when closing “-“
IN5 when closing “-“
IN2 when closing “-“
IN6 when closing “+“
IN3 when closing “-“
IN7 when closing “-“
IN4 when closing “+“
N8 when closing “-“
Note
Universal system inputs settings for typical connection variants – see sub-items 7.4.4; 7.4.5; 7.4.6.
6.2.3 Setting system outputs
GSM-system has 6 outputs to control external devices or lockouts, two of which are power (average current
2A) and positive: OUT4; OUT6.
Outputs OUT1, OUT 2, OUT 3 and OUT5 are low-power (average current 0.3A) and negative. All outputs are
protected from high current and short circuit.
At setting GSM-system outputs determine firstly what the GSM-system will control – if there is planned to
use a siren and an additional pager in the system, if control of central lock and light indication of system is planned.
It is also necessary to foresee amount of lockouts in system, if «Turbotimer» mode is necessary for the car (see
sub-item 6.2.8), and control of additional auto start module. If there is foreseen to control system by any actuation
devices of car using timer channels.
Depending on your configuration, specify the desired function for each output y = (1-11). To adjust system
output enter the following command in SMS text (see item 2.3):
OUTx y
where
x
= (1 - 6) – system output number
y
= (1 – 11) – output function
List of system output y functions:
1
– normal closed blocking
2
– universal timer channel № 1
3
– universal timer channel № 2
4
– light system indication (parking or turn lights)
5
– normal open blocking (see also sub-iyem 6.2.8)
6
– siren
7
– auto start activation (START)
8
– auto start deactivation (STOP)/”Rear lamp» in alarm mode
