19
INDICATION OF SYSTEM STATUS IN DIFFERENT MODES
System status
System alarm/service messages
SMS-text
Voice message
SMS-text
Voice message
Network signal disappears:
xx
Network signal appeared: xx
PIN-code fitting attempt
from a number xxxxxxxxxx
“Call” button is pressed
“Call” button is pressed
Remote engine start is failed
Remote engine start is failed
4.6 Reserve notification channel
At alarm mode activation or if GSM-network signal is lower than required in arm mode system will give
intermittent signal at programmed as pager output (see sub-item 6.2.3). This signal may be used for additional
pager control.
Pager signal transfer cycle duration is 60 seconds.
Note
During arming and disarming signal is not transmitted to pager output. At GSM-network signal
disappearance and appearance signals to siren and parking lights outputs are not transmitted.
4.7 System signals
LED signals
LED operating mode
LED color
System status
OFF
System is disarmed
Slow blinking
Red
System is armed
Slow blinking
Green
PIN-code entering during emergency disarming/service mode
VALET
Fast blinking
Red/Green alternatively
Alarming mode
Fast blinking
Green
Automatic rearming activated – 30 second countdown before
system arming
Lightening constantly
Red
Engine passive lockout («Immobilizer» mode is active)/system –
af ter forced auto start deactivation
1 flash
Red
Immediate call or SMS sending af ter «Call» button release
Siren signals
Signals
System status
1 short
Arm mode is on
2 short
Arm mode is of f
5 short (some time af ter 1 short, see sub-item 6.2.6)
Arm mode is on. One or several armed zones are broken
(opened). Low main battery
Constant or intermitted during 60 seconds
Alarm mode
No signals
System is armed, disarmed. Conforming siren signals are not
active (see sub-item 6.1.10)
