background image

25

SYSTEM SERVICE FUNCTIONS

5.10 Armed object monitoring (tracking) mode

Using option GPS-module Convoy GPSM-003 and information transmit t ed by GSM-syst em into 

specialized server «CONVOY Online», you can activate mobile armed object (car, boat) monitoring (tracking) 
mode.

The user can see on the map current location of the armed object, its route, status of GSM-system 

installed into the object in each route point. All alarm and ser vice events, happened to GSM-system for 
chosen period of time, are registered in the event log on the server.

The user can receive various statistical information as reports about the object according to the 

monitoring data: the distance and duration of the route, time and number of stops during the route, average 
and maximum speed of the route, geofence entrance and exit. Object monitoring reports can be drawn for any 
period and on any date. The drawn report can be saved for further processing and analysis.

To activate monitoring (tracking) mode using SMS (see item 2.3) enter the following command in SMS-

text:

MONITOR x

where 

x

 = 0 – object monitoring (tracking) mode is deactivated 

x

 = 1 - object monitoring (tracking) mode is activated

Default – 0 (monitoring is deactivated)

Af ter receipt SMS with this  command  GSM-system will send report to the number from which it has 

received this SMS:

MONITOR OFF 

or 

MONITOR ON

 Note

Command without x also can be used for mode status request (ON/OFF).

To start using «CONVOY Online» service it is necessary to activate GSM-system GPRS-connection 

setting. To do this specify for GSM-system name of access point of mobile operator of its SIM-card using 
SMS. For this enter the following command in SMS-text (see item 2.3):

APN “name1”

where 

name1

– access point name (APN) of mobile operator of GSM-system SIM-card. Default – “Internet”

GSM-system report:

APN name1

List of APN of some mobile operators of Ukraine:

МТС   

 

Internet

 

 

 

hyper.net

 

 

 

active

 

 

 

smart.net

 

 

 

smart.active

Кyivstar 

 

Internet 

(contract)

 

 

 

www.ab.kyivstar.net

 

 

 

www.kyivstar.net

Djuice  

 

www.djuice.com.ua

Jeans  

 

Internet

Beeline 

 

Internet.beeline.ua

Life   

 

Internet

WEB-name of «CONVOY Online» service server is specified for GSM-system by default (www.convoyonline.com)
In case of using other service of monitoring (tracking) or at changing of WEB-name of server «CONVOY 

Online» it is necessary to specify WEB-name of server for GSM-system using SMS.

To do this enter the following command in SMS-text (see item 2.3):

IPNAME “name2”

where 

name2

 – new name of «CONVOY Online» server or other monitoring (tracking) service

Af ter receipt SMS with this  command  GSM-system will send report to the number from which it has 

received this SMS:

IPNAME name2

Summary of Contents for iGSM-005





































































Reviews: