11
SYSTEM SECURITY FUNCTIONS
3 System security functions
3.1 Arming
3.1.1 Using car regular remote transmitter
If GSM-system is working together with car factory security system (central lock main unit), pressing Arm
button (CL close) on regular remote transmitter leads to GSM-system Arm mode activation. Siren will chirp
once, parking lights flash once, LED will start slow flashing with red light.
When arming mode is activated system will arm doors, hood, trunk, and activate built-in shock and
inclination/motion sensors, external sensors (if such are installed) and engine start and work circuits lockouts.
3.1.2 Using cell phone keyboard
To arm GSM-system using cell phone keyboard (see item 2.2.) during call press key
1
. System will activate
Arm mode. Siren will chirp once. LED will start slow flashing with red light. Parking lights flash once.
In your phone speaker you will hear:
«System is armed»
Note
Built-in shock and inclination/motion sensor will be activated when system is armed after timer channels
work completion (see sub-item 6.2.4) including terminal switches scanning delay (see sub-item 6.2.6).
ATTENTION!
If during arming one door or several doors, hood or trunk were not completely closed system will inform about
it (using call or SMS, see item 4.1 - 4.4). Siren will chirp 5 times, parking lights flash 5 times.
If terminal switches scanning delay function is active (see sub-item 6.2.6.) mentioned siren and parking lights
signals will be delayed for the time specified by this function.
3.1.3 Using SMS
To arm system using SMS, enter the following command in text message (see item 2.3.):
ARM
After receipt SMS with this command, system will activate Arm mode. Siren will chirp once shortly,
parking lights flash once. LED will start slow flashing with red light. After this system will send report with
arming confirmation to the number from which this SMS was sent:
ARM OK
Note
At attempt to activate system arm mode when car ignition is started command will not be performed.
System will send SMS:
ARM fail
ATTENTION!
If during arming one door or several doors, hood or trunk were not completely closed system will inform about
it using call or SMS (see item 4.1 - 4.4), siren and parking lights (5 times signals).
If terminal switches scanning delay function is active (see sub-item 6.2.6.) mentioned siren and parking lights
signals will be delayed for the time specified by this function.
3.2 Arming with sensors bypass
3.2.1 Using car regular remote transmitter
If system is working together with car factory security system (central lock main unit), pressing Arm button
(CL close) on regular remote transmitter leads to Arm mode activation (see sub-item 3.1.1). Repeated pressing
CL close button (not earlier that in 2 seconds) after arming will deactivate alarm zones of system sensors for one
cycle of arming. Siren will chirp once.
3.2.2 Using cell phone keyboard
To deactivate sensors for one cycle of arming using cell phone keyboard (see item 2.2) in Arm mode during
call press key
1
. In your phone speaker you will hear:
«System is armed»
