Manuale di Istruzioni
Instruction Manual
Rev.1 EN
23/08/2018
97
After selecting the
CALIBRATION
, if two channels have been activated into the system
(see chapter 6.1.1 for channel activation), use the
keys to select the
desired channel and press the
key to confirm it.
Fig. 5-13
Otherwise the system will directly go to the following screen.
Fig. 5-14
For the selected channel, the screen shows:
1.
The actual load read by the load sensor attached to the
WIZARD 2
unit in
engineering unit;
2.
The actual load read by the load sensor attached to the
WIZARD 2
unit in bits.
During the load measurement phase, if the set full scale value is reached, the figure on the
screen will blink and the message
OVERLOAD
will be shown on the screen while the
internal buzzer will be activated until the load is returned within the full scale limits.
1
2
Summary of Contents for WIZARD 2 50-C13A0X
Page 2: ......
Page 118: ...Manuale di Istruzione Instruction Manual 23 08 2018 Rev 1 EN 116 Note...
Page 119: ...Manuale di Istruzioni Instruction Manual Rev 1 EN 23 08 2018 117 Note...
Page 120: ......
