Controls WIZARD 2 50-C13A0X, Instruction Manual

Page: 61 / 120

Manuale di Istruzioni
Instruction Manual
Rev.1 EN 23/08/2018
59
4.2.1 TEST RUN menu
After accessing
TEST RUN menu, if two channels have been activated into the system
(see chapter 6.1.1 for channel activation), use the keys to select the
desired channel and press the key to confirm it.
Fig. 4-5
Otherwise the system will directly go to the following screen.
Fig. 4-6
The following parameters are displayed on the screen (use the key to access the
different parameters on the screen):
•
NoTEST : this is the test number that is automatically incremented by one for any
new test;
•
IdTEST
: alphanumeric field that can be edited by the operator to identify the test.
Use the keys to scroll the different digits and the keys the
to set the characters (alphanumeric characters plus standard
symbols are available);
•
AREA : area of the specimen that can be freely edited by the operator. Use the keys
to scroll the different digits and the keys to
set the figure;