Manuale di Istruzione
Instruction Manual
23/08/2018
Rev.1 EN
82
5.
MAINTENANCE
As with all electrical equipment, this unit must be used correctly and maintenance and
inspections must be performed at regular intervals. Such precautions will guarantee the
safe and efficient functioning of the equipment.
Periodic maintenance consists of inspections made directly by the test operator and/or by
the authorized service personnel.
Maintenance to the equipment is responsibility of the purchaser and must be performed as
stated by this chapter.
Failing to perform the recommended maintenance actions or maintenance performed by
unauthorized people can void the warranty.
WARNING:
Failing to perform the recommended maintenance actions or maintenance performed by
unauthorized people can void the warranty.
CONTROLS will not be responsible for maintenance and service actions performed by
unauthorized people.
WARNING:
Before opening/removing the covers, disconnect the mains supply to the device and wait
at least 5 minutes.
WARNING:
All safety devices must be functional at all times. Damaged protective covers or devices
must be replaced immediately. When safety components are replaced, the protective
devices are to be properly attached and tested. Any manipulation of the safety devices
endangers the operating personnel.
WARNING:
Covers/doors can only be removed/opened by maintenance people, by using relevant
tools/buttons. These tools and buttons are for the use of maintenance people only. Never
leave them attached to the unit as this may endanger operator safety.
After performing maintenance/repair, make sure that all covers/doors are properly closed
and locked.
Summary of Contents for WIZARD 2 50-C13A0X
Page 2: ......
Page 118: ...Manuale di Istruzione Instruction Manual 23 08 2018 Rev 1 EN 116 Note...
Page 119: ...Manuale di Istruzioni Instruction Manual Rev 1 EN 23 08 2018 117 Note...
Page 120: ......
