Rev. d 01/1 4
DMP052E
USER INTERFACE
The device is characterized by a user interface
composed of a 3 ½-digit FND display, five keys and
twelve LEDs located on the front membrane. The
information displayed on screen depends on whether
the sensors are present or not and on the related
function enable. Using the buttons it is possible to
navigate a cascade menu, which allows configuring
individually the functions to be assigned to the 4
independent outputs.
Description of keys
Button
Up
to increase values.
Used both for parameter modification and for moving inside the menus.
Button
Down
to decrease values.
Used both for parameter modification and for moving inside the menus.
Cancel and menu exit
Parameter programming and confirmation
Operating mode override
Led description
Ao1
Led associated to analogue output 1, it is on during data display.
Ao2
Led associated to analogue output 2, it is on during data display.
ST
Led associated to temperature control sensor value.
SC
Led associated to compensation sensor value.
SH
Led associated to humidity sensor value.
DI1
Led associated to digital input 1, it is on when the input is active (closed contact).
DI2
Led associated to digital input 2, it is on when the input is active (closed contact).
Rel1
Led associated to relay output 1, it is on when the output is active.
Rel2
Led associated to relay output 2, it is on when the output is active.
@
Led associated to anomaly signal.
Ovr
Led associated to override status of
Operating mode
Mode
Led associated to
Operating mode
.
On Comfort
Blinking Reduced
Off Stop
