Rev. d 01/1 20
DMP052E
Parameters Loop
Pd1
- Mode D1
Push
Set
key to select the parameter to be modified. The parameter value blinks showing the edit
status: push the
Up
and
Down
keys to change values. Once the desired values are modified, push
the
Set
or
Esc
keys to exit.
Parameters loop
P d 1
- Mode D2
Cooling operating Set point (read-only)
Minimum Set-point of Cooling compensation
Minimum Temperature/Humidity of Cooling compensation
S o F
S c 3
c 3
Max. Set-point of cooling compensation
Max. Temperature/Humidity of Cooling compensation
Cooling proportional band
S c 4
c 4
b P F
Maximum Humidity Limit Set point
Maximum Humidity Limit Proportional Band
S H H
b H H
Visible only with Compensation ON (coP parameter = On )
Visible only with max. humidity limit ON (LLH parameter= On )
Cooling temperature Set-point
S t F
Visible only with Compensation Off (coP parameter= Off )
Heating operating Set-point (read-only)
Minimum Set-point of Heating compensation
Minimum Temperature/Humidity of Heating compensation
S o C
S c 1
c 1
Maximum Set-point of Heating compensation
Maximum Temperature/Humidity of Heating compensation
Heating Proportional Band
S c 2
c 2
b P C
Minimum Humidity Limit Set point
Minimum Humidity Limit Proportional Band
S L H
b L H
Visible only with Compensation On setting (coP = On )
Visible only with Humidity Maximum limit ON (LLH = On )
Cooling operating Set-point (read-only)
S t C
Visible only with Compensation Off setting (coP = Off )
