Controlli W500H, User Manual, Page: 33 / 42

Rev. d 01/1 33 DMP052E
TABLES OF OPERATING MODES AND TIME SCHEDULES (LEVEL 2)
Time schedules: (Pro)
Weekly schedule
(Pr7)
Default Range Description Availability
d1 (MON) 3 0 to 5
Fixed mode or daily sched.(On, rid, OFF, Pr1-2-3
) If clock is present (W500HMB model)
d2 (TUE) 3 0 to 5
Fixed mode or daily sched.(On, rid, OFF, Pr1-2-3) If clock is present (W500HMB model)
d3 (WED) 3 0 to 5
Fixed mode or daily sched.(On, rid, OFF, Pr1-2-3) If clock is present (W500HMB model)
d4 (THU) 3 0 to 5
Fixed mode or daily sched.(On, rid, OFF, Pr1-2-3) If clock is present (W500HMB model)
d5 (FRI) 3 0 to 5
Fixed mode or daily sched.(On, rid, OFF, Pr1-2-3) If clock is present (W500HMB model)
d6 (SAT) 1 0 to 5
Fixed mode or daily sched.(On, rid, OFF, Pr1-2-3) If clock is present (W500HMB model)
d7 (SUN) 2 0 to 5
Fixed mode or daily sched.(On, rid, OFF, Pr1-2-3) If clock is present (W500HMB model)
Daily schedule
(Prd)
Default Range Description Availability
co 1: h 7 0 to 23 Change-over time 1
If clock is present (W500HMB model)
: ' 30 0 to 59 Change-over minutes 1
If clock is present (W500HMB model)
: r 0 0 to 2 Change-over mode 1 (NM, RF, FA)
If clock is present (W500HMB model)
co 2: h 12 0 to 23 Change-over time 2 (0-23)
If clock is present (W500HMB model)
: ' 30 0 to 59 Change-over minutes 2 (0-59)
If clock is present (W500HMB model)
: r 1 0 to 2 Change-over mode 2 (NM, RF, FA)
If clock is present (W500HMB model)
co 3: h 13 0 to 23 Change-over time 3 (0-23)
If clock is present (W500HMB model)
: ' 30 0 to 59 Change-over minutes 3 (0-59)
If clock is present (W500HMB model)
: r 0 0 to 2 Change-over mode 3 (NM, RF, FA)
If clock is present (W500HMB model)
co 4: h 19 0 to 23 Change-over time 4 (0-23)
If clock is present (W500HMB model)
: ' 0 0 to 59 Change-over minutes 4 (0-59)
If clock is present (W500HMB model)
: r 2 0 to 2 Change-over mode 4 (NM, RF, FA)
If clock is present (W500HMB model)
Reduced Set
(rid)
Default Range Description Availability
RiC 3 0 to 20 Heating Set decrease Always
RiF 5 0 to 20 Cooling Set decrease Always
RiH 5 0 to 20 Humidity Set decrease Always
Operating modes
Analogue contr.
PA1
Default Range Description Availability
Op 1 1 to 4 Operating mode (1, 2, 3, 4) Always
Abo OFF Automatic/Manual enable (Clock)
Always
Int OFF Integral action enable
Always
coP OFF Compensated set enable With SC sensor
LLH OFF Min. humidity limit loop enable With SH sensor, 1 and 4 operating modes
LHH OFF Max. humidity limit loop enable With SH sensor, 1 and 4 operating modes
AE1 OFF Loop stop on DI1 (External enable 1) Always
AE2 OFF Loop stop on DI2 (External enable 2)
1, 2 and 4 operating modes. 3 Mode: S/W (off)
Changeover
On/Off contr.
Pd1
Default Range Description Availability
Op 1 1 to 4 Operating mode (1, 2, 3, 4) Always
Abo OFF Automatic/Manual enable (Clock) Always
coP OFF Compensated Set enable With SC, 1, 2 and 3 operating modes
LLH OFF Min. (Low) ON/OFF limit enable With SH, 1, 2 and 3 operating modes
LHH OFF Max. (High) ON/OFF limit enable With SH, 1, 2 and 3 operating modes
AE1 OFF Loop stop on DI1 (External enable 1) Always
AE2 OFF Loop stop on DI2 (External enable 2)
1, 2 and 4 operating mode.
In Mode3: S(on)/W (off) Changeover
SEo OFF Other ON/OFF control enable
Operating mode 4
RS OFF Switch off delay enable
Operating mode 4
RA OFF Switch on delay enable
Operating mode 4