Maintenance
46
Replacing Scanner Parts
This section describes how to replace those scanner parts that are liable to wear down over long-term use. Changing parts will renew your scanner and
reestablish optimal results. WIDEsystem monitors scanner usage and will warn you when it is time for a replacement.
The following parts can be replaced:
1. The Glass plate
2. The White Pressure/background platen
3. The scanner lamp.
NOTE
:
Regarding
WIDEsystem WARNING FLAG -
glass plate and White background platen replacement:
After receiving a warning by WIDEsystem
and replacing the part, be sure to reset the part replacement warning flag through
WIDEsystem
‟s “Status” tab.
NOTE
:
Regarding
RECALIBRATION
-
glass plate, White background platen, lamp unit replacement:
Replacing these parts will change conditions in
the scan area. Therefore, it is recommended to recalibrate right after changing and cleaning these parts. Start WIDEsystem and select
Calibrate
.
Important Safety Instruction
: Before replacing any parts, be sure to turn the scanner power off and disconnect the power plug.
