Maintenance
50
Replacing the glass-plate
Insert a new glass plate
Reverse the above operations to reinsert a new glass-plate
– Carefully set
the new glass plate down into the scan area.
1. Fit the new glass-
plate‟s lever hooks on to the round pins on each side
of the scanner.
2. While supporting the glass-plate with fingers on the lever handles,
carefully ease the glass-plate down backwards (away from your body)
so it falls into place.
3. Close the scan area lid.
NOTE
: It is recommended to clean the new glass-plate after inserting it
in the scanner and before scanning.
NOTE
: It is recommended to recalibrate after changing the glass-plate.
Rest the hook on its
pin
– on each side of
the scanner
7
