Maintenance
38
Cleaning the scan area
Follow the steps below for thoroughly cleaning the scanner and scan area.
Be sure to clean the scan area when results are not optimal. Even small
dust particles in the scan area can cause streaks in your scanned image.
You must clean the following scanner parts/areas:
1. The scanner bed
2. Glass plate
3. White background
4. Upper and lower rollers
Caution
: do not use abrasives, acetone, benzene or fluids that
contain these chemicals. Do not spray liquids directly onto the scanner
glass-plate or anywhere else in the scanner.
Caution
: Before cleaning the scan area, be sure to turn the scanner
power off and disconnect the power plug.
To Clean the scan area
You need to open the lid to access and clean the scan area. Follow the instructions below.
Cleaning the scan area
Turn scanner power off and disconnect
1. Press the main power switch (scanner back) to OFF
2. Disconnect the power plug.
1
