Installation
7
Cleaning the scanner
Clean the scanner feeding bed
Lightly clean the scanner exterior and interior to remove any dust accumulated
during transportation. Start with the feeding bed.
The feeding bed is the flat surface in front of the insertion slot. Wipe the feeding
bed thoroughly so dirt and dust are not dragged into the scan area with the
original.
Cleaning the scanner
Open the scanner lid
–
Press the lid release buttons upwards
The internal scan area should be wiped clean for any dust accumulated during
packaging and shipping. The scan area is under the scanner lid so you have to
open it. The scanner lid release buttons are at each side of the scanner lid.
1. Stand at the front of the scanner.
2. Simultaneously place a thumb under each lid release button and push
them upwards until you feel
the lid‟s latch unlock. .
1 and 2. Push the two release buttons upwards
4
3
