—
PLC Communication Settings
—
M2M Gateway PLC Communication Settings
—
39
—
2.
On the “I/O Table Unit Setting", go to the [Built-in Port/Inner Board] and select the [Built-in
Ethernet/IP Port].
The following screen appears. Configure the settings as follows;
[TCP/IP] tab
[FINS/TCP] tab
Set IP address for PLC.
Default gateway also needs to be set.
*When using the product on the local
network, theses settings are not
necessary. However, IP should be set as
"10.1.1.1" for instance to avoid
interference.
Set port number for FINS/TCP.
The Default (9600) is used in this example.