—
PLC Communication Settings
—
M2M Gateway PLC Communication Settings
—
37
—
Device Configuration
The device configuration details are listed below.
Device configuration 1
Device configuration 2
*Notice
- Set a Modbus address respectively when configuring more than one device setting.
The setting example is as follows;
Device configuration 1 : 0 – 9 (2000h - 2009h), Device configuration 2 : 10 – 19 (200Ah - 2013h)
- Start / End addresses are specified in decimal. As for setting address such as X, Y, or W noted in
hexadecimal, change them in decimal notation.
An example : When 1000 - W100F are specified, the addresses are as listed below.
Start address : 4096, End address : 4111
-
“Data Type”, “Cloud Key”, and “Cloud Interval” are the functions to file-record and send the
periodically read information in units of device settings. It is omitted in this particular example.
For more details on the setting, check the "3.Data Transfer to a Higher Level" in the next chapter
"How to use Collection Data".