1-10
1.4 EXPLANATION OF SYMBOLS
F
I
O
IPX1
PURE CUT - WAVEFORM WITH MINIMUM
THERMAL DAMAGE AND HEMOSTASIS
BLEND 1 - CUT WAVEFORM WITH
MODERATE HEMOSTASIS
BLEND 2 - CUT WAVEFORM WITH
HEAVY HEMOSTASIS
MONOPOLAR COAGULATION
BIPOLAR COAGULATION
RETURN MONITOR ALARM -
MONOPOLAR OUTPUT IS DISABLED
SINGLE FOIL - USED WITH ELECTRODES
THAT DO NOT MONITOR CONTACT QUALITY
DUAL FOIL - SETS MONITOR TO USE
ELECTRODES THAT DO MONITOR
CONTACT QUALITY
RESISTANCE - IN DUAL FOIL MODE,
INDICATES RELATIVE RESISTANCE
OF RETURN ELECTRODE CONTACT
WITH THE PATIENT
DRIP PROOF - ENCLOSURE PROTECTED
AGAINST VERTICALLY FALLING WATER
DROPS WHEN EQUIPMENT IS IN A
POSITION OF NORMAL USE
POWER SWITCH
HANDSWITCHED OUTPUT - CONNECTION
FOR HANDSWITCHED MONOPOLAR
ACCESSORIES
FOOTSWITCHED OUTPUT - CONNECTION
FOR FOOTSWITCHED MONOPOLAR
ACCESSORIES
HIGH VOLTAGE CAUTION -
EQUIPMENT HAS HIGH VOLTAGE OUTPUT
CAPABLE OF CAUSING PHYSIOLOGICAL
EFFECTS
BIPOLAR OUTPUT - CONNECTION FOR
BIPOLAR ACCESSORIES
FOOTSWITCHED BIPOLAR OUTPUT
TYPE CF - PATIENT CONNECTIONS ARE
ISOLATED FROM EARTH AND RESIST THE
EFFECTS OF DEFIBRILLATOR DISCHARGE
RETURN ELECTRODE - CONNECTION FOR
MONOPOLAR DISPERSIVE ELECTRODE
RF ISOLATED - PATIENT
CONNECTIONS ARE ISOLATED FROM
EARTH AT HIGH FREQUENCY
CONSULT ACCOMPANYING DOCUMENTS
PRIOR TO PLACING EQUIPMENT
POWER ON - POWER SWITCH
POSITION TO TURN EQUIPMENT ON
POWER OFF - POWER SWITCH
POSITION TO TURN EQUIPMENT OFF
FOOTSWITCH CONNECTOR
CAUTION - THIS CIRCUITRY
SUPPORTS PEAK VOLTAGES GREATER
THAN 1000V
MACHINE FAULT - UNIT HAS
DISABLED ITSELF. REFER TO
ACCOMPANYING DOCUMENTS
CONTROL PANEL
TOP COVER
OUTPUT PANEL
REAR PANEL
A4 ASSEMBLY
ACTIVATION TONE VOLUME
PROTECTIVE EARTH (GROUND)
IN SERVICE
THIS EQUIPMENT INTENTIONALLY SUPPLIES
NON-IONIZING RF ENERGY FOR
PHYSIOLOGICAL EFFECT.
Summary of Contents for sabre 180
Page 1: ...Service Manual...
Page 6: ...This page intentionally left blank...