35
Operator Interface
Condair GS
xxxxxxx_A_EN_1905_Condair-GS_OM
4.2.6.2 Service Menu
The Service menu lets you enter the startup code, reset the service reminder after performing scheduled
maintenance, access the fault and maintenance history lists and perform diagnostics. Refer to
Each tab under the Service menu is discussed below. The Service menu can also be accessed from the
maintenance and fault status area on the Home screen – refer to
Humidifier Service Tab
–
Drain Tank:
allows you to drain the tank. It can take up to 1 hour to
drain the tank using this function. A warning message is displayed ask
-
ing you to confirm if you want to proceed with draining the tank. Refer
to
"Manually Initiate Tank Draining" on page 44
–
Clean Tank:
allows you to flush the tank in preparation for main
-
tenance. It can take up to 2 hours to flush and drain the tank using
this function. A warning message is displayed asking you to confirm
if you want to proceed.
WARNING!
Risk of severe burns from contact with hot steam
vapours or hot water!
DO NOT remove the tank cover until the until has cooled
down to a safe temperature and the tank is fully empty.
–
Service Interval:
allows you to set the time interval between
scheduled maintenance on the unit.
Setting range:
0-3999 hr
Factory setting:
500 hr
–
Reset Service Reminder:
allows you to reset the service reminder
message after performing scheduled maintenance on the unit. A
warning message is displayed asking you to confirm the reset.
CAUTION!
Risk of damage to equipment!
DO NOT reset the service reminder unless the scheduled
maintenance has been performed
.
General Service Tab
–
Disable Burners:
allows you to view the Burners tab (not shown)
so you can enable or disable individual burners in the unit.
–
Burner "n":
allows you to enable or disable the individual burn
-
er; where "n" represents the burner number (1 to 4, depending
on the number of blowers in the unit).
Options:
On
or
Off
Factory setting:
On
Summary of Contents for GC 130
Page 70: ......
