Condair GC 130, Operation And Maintenance Manual

Page: 16 / 72

16
Operator Interface Condair GS xxxxxxx_A_EN_1905_Condair-GS_OM
2
3
4
5 6 7 8
9
1
10
Figure 6: Home Screen Elements
1 Date and time, Current
2 Operating status message – refer to
"Operating Status" on page 16 for
details.
3 Humidity control information – shows
the type of control signal and the steam
output requested.
4 Service/Warning/Fault status message –
refer to "Maintenance and Fault Status"
on page 17 for details.
5 Button, <Help> – access technical sup-
port help information. Refer to "Help" on
page 17 for details.
6 Button, <Drain> – manually initiate the
drain function. Refer to "Manually Initiate
Tank Draining" on page 44 for details.
7 Button, <About> – access the system in-
formation. Refer to "System Information"
on page 17 for details.
8 Button, <Menu> – access the Main menu.
Refer to "Main Menu" on page 21
for details.
9 Visual indication, current steam output
level
10 Model number, humidifier
4.2.2 Operating Status
The operating status area of the Home screen (refer to Table 3 on page 16 ) shows the current operating
status message and an associated status icon. The messages are described in Table 3 , and the status
icons are described in Table 4 .
Table 3: Operating Status Descriptions
Message Description
Humidifying The humidifier is generating steam.
Stopped The humidifier is stopped because a condition with a "Fault" status is active.
Disabled The Condair GS humidifier is disabled by the BMS (building management system).
Safety Loop One or more contacts in the external security loop is open, so the humidifier has stopped producing steam.
Idle The humidifier is in standby mode (no humidity demand).
Idle Drain The humidifier has been in standby mode for a number of hours. The Idle Drain Time has elapsed and the Idle
Drain function is active – the humidifier is being drained. The humidifier will automatically refill when it receives
a valid humidity demand signal.
Idle Empty Indicates that the tank is empty during idle.
Keep Warm The humidifier is in standby mode, and the
Keep Warm
function is activated.
Filling Indicates that the tank is being filled.
Fill check The humidifier is performing a fill check.
Drain check The humidifier is performing a drain check.
Draining The humidifier is draining.
Warning A condition with a "Warning" status is active. In addition, the message "Warning" is shown in the mainte -
nance/fault status area of the Home screen. The humidifier will continue to produce steam when there is a
demand (unless the warning relates to a control signal).
Fault A condition with a "Fault" status is active. The humidifier is stopped. In addition, the message "Fault" is
shown in the maintenance/fault status area of the Home screen.