19
CONFIGURING THE VXH264D
CAmERA
cAmeRA: moTIon SenSoR
SenSITIVITy: between 1 (lowest) and 10 (Highest) determines the degree of motion required
before recording is activated.
AReA SeTUP: choosing this option allows the operator to define which areas of the image are
monitored for motion detection.
black grid squares represent detection areas, blank areas are ignored. The default is that motion
will be detected across the entire image.
To quickly select or deselect the entire grid, press
RETURN
to bring up the motion menu.
Highlight SelecT All or DeSelecT All as appropriate and press
ENTER.
AReA SeTUP
cAmeRA: PTZ SeTUP conTInUeD
To set up a Tour, using the cursor keys select
TOUR
and press
ENTER
.
A setup screen will then appear allowing the operator to configure which presets the PTZ camera
will go to after a set dwell time.
To enable the tour, set the
mODE
to
AUTO
, and then configure the
PRESET NO
. to the presets
you have defined.
when you have finished the configuration, press
OK
to come out of the setup, and then APPly.
The Tour will start immediately.
