15
TELEmETRY CONTROL
TELEMETRY CONTROL
Speed domes and other telemetry devices connected to the VXH264D, can be fully controlled from the
front panel or Remote control.
In live display mode, press the
PTZ
button. To select a camera to control, use the
CHANNEL
SELECTION
buttons.
when
PASSwORD
is set to on only authorised users or ADmIn users can control the PTZ.
Pan and tilt movement is controlled by the
CURSOR KEYS
. Zoom is controlled by turning the
SHUTTLE
wHEEL
.
tt
&
t
controls focus,
u
&
uu
controls the iris.
Press
PANIC
or
ARCHIVE
buttons to decrease or increase the preset number.
Press
PAUSE
to program the preset, or
ENTER
to call an existing preset.
Press
RETURN
to exit PTZ mode and return to live view.
KEY LOCK FUNCTION
An operator with ADmIn rights can choose to lock the VXH264D
front panel to prevent any unauthorised control.
Press the
LOCK
button, enter the default password ‘1234’ and press
ENTER
. All buttons are now disabled. To unlock, press any button
and enter the default password ‘1234’.
SHUT DOWN
SEQUENCE
PANIC RECORDING
Panic recording will override all standard recording settings, PAnIc
record settings are configured in the recording set-up. (Page 36)
Press the
PANIC
button. The top right of the display shows a red P
to indicate that the VXH264D is in panic recording mode. Press the
PANIC
button again to return to normal recording mode.
Press the
SEQ
button. each channel is shown in full screen for a
set period of time (default 5 seconds) before switching to the next
channel. To stop the sequence on a particular channel, press the
SEQ
button again.
more complex sequences can be programmed through the setup
menu. (Page 22)
only an operator with ADmIn rights can shut down the VXH264D.
Press the
POwER
button, use the cursor key to select
POwER OFF
then
ENTER
key. you can then enter the default password ‘1234’
and press
ENTER
.
The VXH264D shuts down and emits two beeps to indicate that
power can be safely removed.
