background image

 

www.conairnet.com 

U S E R   G U I D E    
UGB011-0207 

TrueBlend

 

G r a v im e t ric   B l e n d e r  
S o f t w a re   Ve r s i o n  V 2 .7 

USER INSTRUCTIONS

 • About this operating manual • Warranty and liability • Layout of the manual • Meaning of safety 

information Display conventions • Pictograms for safety and information Abbreviations • 

SAFETY

 • General • Designated 

use • Sources of danger • Safety devices • Warning symbols on the unit • Information for the operator • Information for 

operating and maintenance personnel • 

TECHNICAL SPECIFICATIONS

 • Manufacturer • Specifications • 

TRANSPORT AND 

SETUP

 • Unpacking • Lifting • Setup • Positioning controller • Making connections • Stowing discharge chute 

STRUCTURE AND FUNCTION

 • Structure of the unit • Brief description of the functional units • Layout of the material 

hoppers • Operating modes • Gravimetric mode • Volumetric mode • Combined mode • 

COMMISSIONING

 • 

OPERATION

  

Switching on • Menu structure • Navigation • Starting and stopping the metering and mixing process • Switching off  

Logging in/logging out • Commissioning • Mixing process • Component setup • GRAVICOLOR Setup • Working with recipes 

Changing material for a component (also valid for all other components) • Checking total throughout • Creating reports

  

C o r p o r a t e   O f f i c e :   4 1 2 . 3 1 2 . 6 0 0 0     |     I n s t a n t   A c c e s s   2 4 / 7   ( P a r t s   a n d   S e r v i c e ) :   8 0 0 . 4 5 8 . 1 9 6 0     |     P a r t s   a n d   S e r v i c e s :   8 1 4 . 4 3 7 . 6 8 6 1  

WARNING - Reliance on this Manual Could Result in Severe Bodily Injury or Death!

This manual is out-of-date and is provided only for its technical information, data and capacities. Portions of this manual
detailing procedures or precautions in the operation, inspection, maintenance and repair of the product forming the subject
matter of this manual may be inadequate, inaccurate, and/or incomplete and cannot be used, followed, or relied upon.
Contact Conair at [email protected] or 1-800-654-6661 for more current information, warnings, and materials about
more recent product manuals containing warnings, information, precautions, and procedures that may be more adequate
than those contained in this out-of-date manual.

Summary of Contents for TrueBlend TB500-4























































































































































Reviews: