IP Type Of Service
Select either: Normal Service, Minimize Cost,
Maximize Reliability, Maximize Throughput,
Minimize Delay
If non-blank value is selected for 'Mark IP
Precedence' and/or 'Mark IP Type Of Service',
the corresponding TOS byte in the IP header of
the upstream packet is overwritten by the
selected value.
Note:
If Differentiated Service Configuration
checkbox is selected, you will only need to
assign ATM priority. IP Precedence will not be
used for classification. IP TOS byte will be used
for DSCP mark.
Assign Differentiated Services
Code Point (DSCP) Mark
Choose the required DSCP value. Default value
is “000000”.
Mark 802.1p if 802.1q is
enabled on WAN
Select between 0-7.
Specify Traffic Classification Rules
Enter the following conditions either for physical LAN port or for IP level, SET-1,
or for IEEE 802.1p, SET-2
SET-1
Physical LAN Port
User can select from: ENET, ENET(1-4).
Protocol
User can select from: TCP, TCP/UDP, UDP or
ICMP.
Source IP Address
Enter the source IP address.
Source Subnet Mask
Enter the subnet mask for the source IP
address.
Source Port (port or port:port)
Enter source port number.
Destination IP address
Enter destination IP address.
Destination Subnet Mask
Enter destination subnet mask.
Destination port (port or
port:port)
Enter destination port number.
SET-2
802.1p Priority
Select between 0-7.
Traffic Class Name
Enter name for traffic class
Priority
Select Low, Medium or High.
IP Precedence
Select between 0-7. The lower the digit shows
the higher the priority
IP Type Of Service
Select either: Normal Service, Minimize Cost,
Maximize Reliability, Maximize Throughput,
Minimize Delay
Physical LAN Port
User can select from: ENET, ENET(1-4).
Protocol
User can select from: TCP, TCP/UDP, UDP or
ICMP.
Source IP Address
Enter the source IP address.
Source Subnet Mask
Enter the subnet mask for the source IP
address.
Source Port (port or port:port)
Enter source port number.
Destination IP address
Enter destination IP address.
Destination Subnet Mask
Enter destination subnet mask.
Destination port (port or
port:port)
Enter destination port number.
802.1p Priority
Select between 0-7. The lower the digit shows
the higher the priority
- -
54
