DHCP Server:
To enable DHCP, select
Enable DHCP server
and enter starting
and ending IP addresses and the leased time. This setting
configures the router to automatically assign IP, default
gateway and DNS server addresses to every PC on your LAN.
DHCP Server Relay:
Enable with checkbox and enter DHCP Server IP address.
This allows the Router to relay the DHCP packets to the
remote DHCP server. The remote DHCP server will
provide the IP address.
This option is hidden if NAT is
enabled
Configure the second IP address
by
ticking the checkbox shown below.
IP Address: Enter the secondary IP address for the LAN port.
Subnet Mask: Enter the secondary subnet mask for the LAN port.
NOTE:
The
Save
button saves new settings to allow continued configuration
while the
Save/Reboot
button not only saves new settings but also
reboots the device to apply the new configuration (i.e. all new settings).
- -
40
