Comtech EF Data SMS-7000, Installation And Operation Manual

Page: 126 / 148

Remote Control Operation SMS-7000 Modem Protection Switch
A–10 Rev. 3 Draft
A.3.6 Mode
Operational
Mode Command:
Response:
Status:
Response:
<add/MODE_xxxxxx'cr'
>add/MODE_xxxxxx'cr''lf']
<add/MODE_'cr'
>add/MODE_xxxxxx'cr''lf']
Where: xxxxxx = AUTO or MANUAL.
Notes:
1. This command selects the mode of operation for the
SMS-7000.
2. If AUTO is selected, the M&C in the SMS-7000
controls all switching decisions.
3. If MANUAL is selected, the operator controls all
switching decisions via the following three commands.
Set Backup
Modulator,
On-line/
Off-line
(Manual
mode,
Independen
t Switching) Command:
Response:
Status:
Response:
<add/MOL_Bx_y'cr'
>add/MOL_Bx_y'cr''lf']
<add/MOL_Bx'cr'
>add/MOL_Bx_y'cr''lf']
Where:
x = 1 or 2 (backup modem modulator number).
y = 0 to 8 (prime modem modulator number 1 through 8; 0
takes backup modulator offline).
Notes:
1. This command places specified backup modem
modulator online or offline for the specified prime
modem modulator.
2. Enter command in Manual mode only.
Set Backup
Demod.,
On-line/
Off-line
(Manual
mode,
Independen
t Switching) Command:
Response:
Status:
Response:
<add/DOL_Bx_y'cr'
>add/DOL_Bx_y'cr''lf']
<add/DOL_Bx'cr'
>add/DOL_Bx_y'cr''lf']
Where:
x = 1 or 2 (backup modem demodulator number).
y = 0 to 8 (prime modem demodulator number 1 through 8;
0 takes backup modulator offline).
Notes:
1. This command places specified backup modem
demodulator online or offline for the specified prime
modem demodulator.
2. Enter command in Manual mode only.
Set Backup
Modem,
Online/
Offline
(Manual
mode,
Dependent
Switching) Command:
Response:
Status:
Response:
<add/MOL_Bx_y'cr'
>add/MOL_Bx_y'cr''lf']
<add/MOL_Bx'cr'
>add/MOL_Bx_y'cr''lf']
Where:
x = 1 or 2 (backup modem number).
y = 0 to 8 (prime modem number 1 through 8; 0 takes
backup modem offline).
Notes:
1. This command places specified backup modem online
or offline for the specified prime modem.
2. Enter command in Manual mode only.