Comtech EF Data SMS-7000, Installation And Operation Manual

Page: 121 / 148

SMS-7000 Modem Protection Switch Remote Control Operation
Rev. 3 Draft A–5
Notes:
1. “add” is used to indicate a valid 1 to 3 character device address in the range
between 1 and 255.
2. The switch does not respond to erred communications (i.e., parity and
framing errors).
A.2.3 End Character
Each message is ended with a single character which signals the end of the message.
This character is:
•
“cr”
Carriage return character for commands
•
“]”
End bracket for responses