CDM-Qx Satellite Modem
Revision 6
Front Panel Operation
MN/CDMQx.IOM
Buffer Source
(IN = internal, RX = Rx satellite, TT = Tx terrestrial)
Buffer Clocking
Mode
(SAT = buffer disabled, BUF = buffer enabled)
Demod Sweep Acquisition range
RSI state
(I = Receive Spectral Inversion on, N = off)
Rx: C N N 35
Using
▲▼
arrow keys displays the following information:
▲▼
Top line:
Reed-Solomon code rates
(C=Comtech(220,200), E=EF Data(225,205),
I=IESS-310(219,201).
Rx Clock Inversion
(N=Normal, I=Inverted).
Rx Data Inversion
(N=Normal, I=Inverted).
Rx Roll-Off (
α
) factor
(20=20% roll-off, 35=35% roll-off)
5.7.4.4 (Info
%
Buffer) - BUFFER INFORMATION
Buffer: Enabled (Tx=Rx)
This displays if the buffer is enabled or disabled, shows the exact clocking mode
(TX=RX, or TX<> RX), and the buffer size. Pressing
ENTER
takes the user back to the
previous menu.
(ENT)
5.7.4.5 (Info
%
Frame) – FRAMING AND EDMAC INFORMATION
Examples:
Framing: AUPC-Only, D&I++
(ENT or CLR)
Framing:AUPC-Only,EDMAC2
(ENT or CLR)
This screen shows
EDMAC
mode, and shows if the unit is an EDMAC MASTER or
SLAVE, with the appropriate address. Pressing
ENTER
or
CLEAR
takes the user back to
the previous menu.
Framing: AUPC+EDMAC
Slave, 0241 (ENT or CLR)
Framing: AUPC+EDMAC2
Master,0240 (ENT or CLR)
5–56
Summary of Contents for CDM-Qx
