Comtech EF Data CDM-Qx, Installation And Operation Manual

Page: 58 / 224

CDM-Qx Satellite Modem Revision 6
Front Panel Operation MN/CDMQx.IOM
(Config
%
Remote
%
Serial
%
Baudrate)
Selecting
Baud Rate
presents the user with the following menu:
Values of 2400, 4800, 9600, 19200, 38400, and 57600 baud are possible. Edit the baud
rate of the remote control bus connected locally to the M&C computer. The value is
changed using the
)( arrow keys, then pressing
ENTER
.
Note that the asynchronous character format is
FIXED
at 8 data bits, 1 stop bit, no parity
(8-N-1).
M&C Serial Bus Baud Rate:
19200 Baud ( ▲ ▼ , ENT)
(Config
%
Remote
%
Ethernet)
Selecting
Ethernet
displays the following:
Ethernet Config: ( ◄ ► , ENT)
Gateway Address MAC SNMP
(Config
%
Remote
%
Ethernet
%
Gateway)
Selecting
Gateway
displays the following submenu:
M&C
Ethernet IP Gateway:
192.128.001.001 ( ◄ ►▲ ▼ , ENT)
Edit the IP Gateway Address for the Ethernet M&C port for this unit by selecting the digit
to be edited, using the
◄ ►
arrow keys. The value of the digit is then changed using the
▲
▼
arrow keys, then pressing
ENTER .
(Config
%
Remote
%
Ethernet
%
Address)
Selecting
Address
displays the following submenu:
M&C
Ether IP Address/Range:
192.168.001.001/24 ( ◄ ►▲ ▼ ,ENT)
Edit the IP Address and Range for the Ethernet M&C port for this unit by selecting the digit
to be edited, using the
◄ ►
arrow keys. The value of the digit is then changed using the
#$
arrow keys, then pressing
ENTER
.
5–10