Comtech EF Data CDM-Qx, Installation And Operation Manual

Page: 55 / 224

CDM-Qx Satellite Modem Revision 6
Front Panel Operation MN/CDMQx.IOM
5.6 Opening Screen
Comtech EF Data CDM-Qx
Firmware Version: 1.1.1
This screen is displayed whenever power is first applied to the unit (70/140 MHz
version). For L-Band units, the word “
CDM-Qx ” is replaced with “ CDM-QxL ”.
Pressing any key takes the user to the top-level selection screen:
5.7 MAIN MENU (TOP-LEVEL SELECTION)
MAIN MENU: Config Monitor
Test Info Save/Load Utility ODU
The user is presented with the following choices:
Config (Configuration) This menu branch permits the user to fully configure the unit.
Monitor
This menu branch permits the user to monitor the alarm status of the unit, to
view the log of stored events, and to display the Receive Parameters screen.
Test
This menu branch permits the user to invoke one of several test modes
(loopbacks, for example).
Info
(Information) This menu branch permits the user to view information on the
unit, without having to go into configuration screens.
Save/Load
This menu branch permits the user to save and to retrieve up to 10 different
modem configurations.
Utility
(Utility) This menu branch permits the user to perform miscellaneous
functions, such as setting the Real-time clock, adjusting the display
brightness, etc.
5–7