Comtech EF Data CDM-Qx, Installation And Operation Manual

Page: 106 / 224

CDM-Qx Satellite Modem Revision 6
Front Panel Operation MN/CDMQx.IOM
5.7.5.1 (Save/Load
%
Save) – SAVE CONFIGURATION
Selecting
Save
displays the following screen, if the selected location is empty:
Save Config to Location: 9
Empty ( ▲ ▼ ENT)
Save Config to Location: 9
However, if the location already contains data, the following screen is displayed:
11:10:29 23/12/03 ( ▲ ▼ ENT)
The user is shown the time and date stamp of the previously stored configuration, for
identification purposes.
Locations 1 through 10 are available. Select the location to which to store the current
configuration, using the
#$ arrow keys, then press
ENTER
. If the selected location does
not contain a previously stored configuration, the following screen is displayed:
Your Configuration has been
Saved to Location 9 (ENT)
Pressing
ENTER
or
CLEAR
takes the user back to the previous menu.
If, however, the selected location contains a previously stored configuration, the
following screen is displayed:
Location 9 Contains Data!
Overwrite? NO YES ( ◄ ► ENT)
Select
NO
or
YES
using the
◄ ►
arrow keys, then press
ENTER
. Selecting
YES
will
overwrite the existing configuration at the selected location.
5.7.5.2 (Save/Load
%
Load) – LOAD CONFIGURATION
Having selected
Load
, if there is a configuration stored at the selected location the
following screen is displayed:
Load Config from Location: 9
11:10:29 23/12/03 ( ▲ ▼ ENT)
Note the data and time stamp identifying the stored configuration. If the selected location
contains no data, the following screen is displayed:
Load Config from Location 9
Empty ( ▲ ▼ ENT)
5–58