Comtech EF Data CDM-Qx, Installation And Operation Manual

Page: 201 / 224

CDM-Qx Satellite Modem Revision 6
Remote Control MN/CDMQx.IOM
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments
for
Command or
Response to
Query
Description of arguments
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
OGC Outdoor
Unit Global
Configuration OGC= 50 bytes Command or Query OGC= OGC? OGC= aabcde
xxxxhhhiiiijjjjjkxxxxxxlm
nnnooopppppqxxxxxx ODU Global Configuration in the form: OGC?
aabcdexxxxhhhiiiijjjjjkxxxxxxlmnnnooopppppqxxxxxx, where: OGC*
(L-Band Unit only) OGC# (see description of
arguments)
OGC^
aa=BUC Address same as BAD
b=BUC FSK comms enable same as BCE
c=BUC Power Control same as BPC Where: n=0 to 9
d=BUC 10 MHz Freq Ref Enable same as BFR Returns the OGC
portion of 1 of 10
stored configurations
e=BUC TX Output Enable same as BOE
xxxx=expansion bytes
hhhh=BUC Low Alarm Limit same as BCL
iiii=BUC High Alarm Limit same as BCH (see description of
arguments)
jjjjjk=BUC LO frequency, mix sign same as BLO
xxxxxx=expansion bytes
l=LNB Power Control same as LPC
m=LNB 10 MHz Freq Ref Enable same as LFR
nnn=LNB Low Alarm Limit same as LCL
ooo=LNB High Alarm Limit same as LCH
pppppq=LNB LO Freq, mix sign same as LLO
xxxxxx=expansion bytes
Any unavailable parameters will be filled with
xxx.
C-35