Comtech EF Data CDM-Qx, Installation And Operation Manual

Page: 89 / 224

CDM-Qx Satellite Modem Revision 6
Front Panel Operation MN/CDMQx.IOM
(Config
%
ODU
%
BUC
%
Alarm) - BUC ALARM
Selecting
Alarm
displays the following submenu:
Set BUC Current Alarm:
Upper Lower ( ◄ ► , ENT)
Select
Upper
or
Lower
using the
◄ ►
arrow keys, then press
ENTER
.
Selecting
Upper
displays the following submenu:
BUC Current Alarm Upper
Limit:1200mA ( ◄ ► , ▲▼ , ENT)
The range of current is from 500 to 4000 mA. Edit the BUC Current Alarm Upper limit
by selecting the digit to be edited, using the
! "
arrow keys. The value of the digit is
then changed using the
#$
arrow keys, then pressing
ENTER
.
Selecting
Lower
displays the following submenu:
The range of current is from 100 to 3000 mA. Edit the BUC Current Alarm Lower limit
by selecting the digit to be edited, using the
! " arrow keys. The value of the digit is
then changed using the #$ arrow keys, then pressing
ENTER
.
(Config
%
ODU
%
BUC
%
Delay) - BUC DELAY
Selecting
Delay
displays the following submenu:
The valid range is from 0 to 999 seconds. Edit the value of the power-on delay by selecting
the digit to be edited, using the
! " arrow keys. The value of the digit is then changed
using the #$ arrow keys, then pressing
ENTER
.
(Config
%
ODU
%
BUC
%
LO) - BUC LO
Selecting
LO
displays the following submenu:
The valid range is from 0 to 35000 MHz. Edit the value of the BUC LO frequency by
selecting the digit to be edited, using the
! "
arrow keys. The value of the digit is then
changed using the
#$
arrow keys, then pressing
ENTER
.
BUC Power-On Delay:
001 seconds ( ◄ ►▲ ▼ ENT)
BUC Current Alarm Lower
Limit:1200mA (
◄ ► , ▲▼ , ENT)
BUC LO Frequency:
12000 MHz (
◄ ► ▲ ▼ ENT)
5–41