Comtech EF Data CDM-Qx, Installation And Operation Manual

Page: 187 / 224

CDM-Qx Satellite Modem Revision 6
Remote Control MN/CDMQx.IOM
Parameter
Type
Command
(Instruction
Code and
qualifier)
Arguments
for Command
or Response
to Query
Description of arguments
Response
to
Command
(Target to
Controller)
Query
(Instruction
Code and
Qualifier)
Response to query
(Target to
Controller)
Configuration
Save CST= 1 byte Command only
Causes the CDM-QX to store the current unit configuration
(common functions and all four slots) in Configuration Memory
location defined by the 1-byte argument (0 to 9)
Example: CST=4 (store the current configuration in location 4) CST=
CST?
CST*
CST#
CST^ N/A N/A
Configuration
Load CLD= 1 byte Command only
Causes the CDM-QX to retrieve a previously stored unit
configuration (common functions and all four slots) in
Configuration Memory location defined by the
1-byte argument ( 0 to 9)
Example: CLD=4 (retrieve unit configuration from location 4) CLD=
CLD?
CLD*
CLD#
CLD^ N/A N/A
ReCenter Buffer RCB= None Command only
Forces the software to recenter the receive
Plesiochronous/Doppler buffer.
Note: This command takes no argument.
Example: RCB= RCB=
RCB?
RCB*
RCB#
RCB$
RCB^
RCB@ N/A N/A
RTC Date DAY= 6 bytes Command or Query
A date in the form ddmmyy, where:
dd=day of the month (01 to 31)
mm=month (01 to 12)
yy=year (00 to 99)
Example: DAY=240457 (April 24, 2057) DAY=
DAY?
DAY*
DAY#
DAY^ DAY? DAY=ddmmyy (see
description of arguments
RTC Time TIM= 6 bytes Command or Query
A time in the form hhmmss, indicating the time from midnight,
where:
hh=hours (00 to 23)
mm=minutes (00 to 59
ss=seconds (00 to 59)
Example: TIM=231259 (23 hours, 12 minutes, 59 seconds) TIM=
TIM?
TIM*
TIM#
TIM^ TIM? TIM= hhmmss (see
description and
arguments)
Clear All Stored
Events CAE= None Command only
Forces the software to clear the software events log.
Example: CAE=
Note: This command takes no arguments.
CAE=
CAE?
CAE*
CAE#
CAE^ N/A N/A
C-21